* Jump to Japanese pages. Icon of Japanese Flag

WR-AOTS™ Ver. 2.04 Manual
Wii® Remote Plus Controller™ navigation

This page explains [1] Method to connect, [2] Method to mount, [3] Method to calibrate of Wii® Remote Plus Controller™ and [4] Method to navigate by Wii® Remote Plus Controller™ in WR-AOTS™ Ver. 2.04.

Skip Caution, Table of contents, and jump to main body.

Method to connect

If you want to use Wii® Remote Plus Controller™, it must be connected to your computer in advance to start WR-AOTS™ Ver. 2.04 application software.

This section explains how to connect Wii® Remote Plus Controller™ and your computer via Bluetooth by the recommended Bluetooth adapter control software as an example. Please prepare Wii® Remote Plus Controller™ with batteries.

  1. Open Bluetooth Settings.

    Please double-click the Bluetooth icon (Bluetooth Mabager will appear when cursor is on it) in the Notification icons in the Task bar of Windows desktop, and start the Bluetooth Settings.

    This figure shows Bluetooth icon in the Notification icons.
    To top of Method to connect
  2. Bluetooth Settings window opens.

    When you double-click Bluetooth icon, the Bluetooth Settings window opens. Please push New Connection button.

    This figure shows pushing New Connection button on the Bluetooth Settings window.
    Copyright © 2013 Planex & Toshiba.
    To top of Method to connect
  3. Add New Connection Wizard opens.

    When you push New Connection button, the Add New Connection Wizard opens. Please select the Express Mode and push the Next button.

    This figure shows selecting Express Mode and pushing Next button on the Add New Connection Wizard window.
    Copyright © 2013 Planex & Toshiba.
    To top of Method to connect
  4. Make your computer recognize Wii® Remote Plus Controller™.

    When you push the Next button, the status changes to Select a device and your computer starts to search connectable Bluetooth devices. Please push the small red SYNC button on the back of Wii® Remote Plus Controller™ (you can use tip of ballpoint pen to push the very small button). If you find Nintendo RVL-CNT-01-TR on display, please push the Next button (if you cannot find it, please push the Refresh button).

    This figure shows pushing SYNC button on the back of Wii(R) Remote Plus Controller(TM). This figure shows selecting Nintendo RVL-CNT-01-TR in the device selection window on the Add New Connection Wizard, and pushing Next button.
    Copyright © 2013 Planex & Toshiba.
    To top of Method to connect
  5. Search services mode opens and the Wizard will close automatically.

    When you push the Next button, the message Please wait while wizard searches for remote device services. is displayed on the window, and the Wizard window will close automatically. If the window will not close, please try pushing Wii® Remote Plus Controller™ buttons. If the window does not close yet, please push the Cancel button on the window to retry the procedure.

    This figure shows Search Services window on Add New Connection Wizard.
    Copyright © 2013 Planex & Toshiba.
    To top of Method to connect
  6. Connection completeness displayed on Bluetooth Settings window.

    When the Add New Connection Wizard window closes automatically, the Bluetooth Settings window returns. Please find the Nintendo RVL-CNT-01-TR icon standing for Wii® Remote Plus Controller™, and the symbol of green and light green chain at the icon. The chain stands for successful connection between your computer and Wii® Remote Plus Controller™ via Bluetooth.

    This figure shows displaying the Nintendo RVL-CNT-01-TR icon standing for Wii(R) Remote Plus Controller(TM) and the green and light green chain standing for successful connection.
    Copyright © 2013 Planex & Toshiba.

    The connection procedure is completed.

    To top of Method to connect
  7. (Additional procedure) Disconnect.

    You can disconnect after use. Please click the Nintendo RVL-CNT-01-TR icon by right button, and select Disconnect in the sub menu.

    This figure shows right-clickng the Nintendo RVL-CNT-01-TR icon standing for Wii(R) Remote Plus Controller(TM) and disconnecting.
    Copyright © 2013 Planex & Toshiba.

    The symbol of green and light green chain will disappear. The disconnection is completed.

    This figure shows displaying the Nintendo RVL-CNT-01-TR icon standing for Wii(R) Remote Plus Controller(TM), and that the green and light green chain disappears.
    Copyright © 2013 Planex & Toshiba.
    To top of Method to connect
  8. (Additional procedure) Connect in second time and after.

    If it is not the first time to connect, you can find the icon Nintendo RVL-CNT-01-TR is still on the Bluetooth Settings window. Please double-click it. When the window Prepare to connect to the remote HID device, then click OK. opens, please push OK button after pushing SYNC button on the back of Wii® Remote Plus Controller™.

    This figure shows pushing OK button on the window saying Prepare to connect to the remote HID device, then click OK.
    Copyright © 2013 Planex & Toshiba.

    The green and light green chain will appear, and connection is completed.

    To top of Method to connect
End of Method to connect.
[9] To top of this page.

Method to mount

This section explains how to mount Wii® Remote Plus Controller™ on the trainee.

Please mount Wii® Remote Plus Controller™ on the trainee's head so that its main button side is upper, left side is front and socket side is left.

This photo shows the Wii(R) Remote Plus Controller(TM) from the oblique direction so as to show main button side, left side and socket side. This figure shows that main button side, left side and socket side of Wii(R) Remote Plus Controller(TM) is up, front and left direction of dead, respectively.

If you mount Wii® Remote Plus Controller™ on headphones, it can be fixed on top of the head band with belt or strong double-sided tape. Please make sure that its right-left orientation is correct.

* On the use of Wii® Remote Plus Controller™ in WR-AOTS™ Ver. 2.04, the Cross button is right, and the battery box or Wii logo is left. Please note that it is opposite orientation to the use of it as game controller.

This photo shows the Wii(R) Remote Plus Controller(TM) is fixed on top of the head band of headphones. This figure shows that main button side, left side and socket side of Wii(R) Remote Plus Controller(TM) is up, front and left direction of the head, respectively.
End of Method to mount.
[9] To top of this page.

Method to calibrate

The built-in sensors of Wii® Remote Plus Controller™ must be calibrated in advance to run.

* If you use GPS as well, it also must be calibrated. The procedure of GPS calibration is almost the same as Wii® Remote Plus Controller™. Please refer to How to calibrate GPS.

  1. Check Wii checkbox.

    Please start WR-AOTS™ Ver. 2.04 after Wii® Remote Plus Controller™ is connected to your computer, and make sure that Wii checkbox is checked.

    This figure shows checking Wii checkbox.
    To top of Method to calibrate
  2. Make trainee stand still at the ready to start training.

    Please make the trainee stand still at the ready to start the training. The position and orientation of the trainee's head in this time will be the initial position (i.e. the origin of the training field) and the south direction (i.e. upper side of the training field).

    This figure shows that the trainee with Wii(R) Remote Plus Controller(TM) and headphone is standing still at the ready to start the training. This figure shows that the head position and orientation of the Trainee in the training field is the initial position (i.e. the origin of the training field) and the south direction (i.e. upper side of the training field).
    To top of Method to calibrate
  3. Calibrate now.

    If you are ready, please push Calibration button. The question window to ask Calibration OK? will open. Please push OK button to start the calibration. It takes about 2 s to calibrate. Please do not move Wii® Remote Plus Controller™ during the calibration.

    This figure shows pushing Calibration button. This figure shows pushing OK button on the question window.
    To top of Method to calibrate
End of Method to calibrate.
[9] To top of this page.

Method to navigate

In order to navigate the Trainee in the training field, operations are available when the status is Run (the Run button was pushed and the Action indicator shows Run). The Wii® Remote Plus Controller™ navigation includes Parallel movement, Rotation, Break and Home.

This figure shows pushing Run button This figure shows that the Action indicator shows Run.
End of Method to navigate.
[9] To top of this page.