The training field data of WR-AOTS™ Ver. 2.04 is XML format. Thus, you can edit the training field, not only by the Edit window of WR-AOTS™ Ver. 2.04, but also by a XML editor or a general text editor.
The DTD file of XML for the training field is on the following URL. Please download and read it.
The Source window of WR-AOTS™ Ver. 2.04 can show the source code of XML, but you can not edit it from this window directly.
In the Edit window of WR-AOTS™ Ver. 2.04, you cannot edit the training field name (the training field file name except extension will be the training field name automatically), but if you can edit the source code of XML directly, you can give its name freely.
In the source code of XML, the distances are expressed in cm, not in m, because 3-D sound processors of AOTS Ver. 1.0 used cm to express the distance.
In the source code of XML, the Card and the Phrase are combined and described as phrase element.
WR-AOTS™ Ver. 2.04 uses the wide-range positioning technologies to measure the position and direction of the trainee's head.
Wide-range positioning technology is a general term of the positioning technologies having unlimited measurement range, and including GPS, acceleration sensor, gyro sensor, terrestrial magnetism sensor, etc. WR-AOTS™ Ver. 2.04 uses the following wide-range positioning sensors.
GPS : USB-connectable NMEA-formatted GPS
Acceleration sensor : Built-in triaxial acceleration sensor of Wii® Remote Plus Controller™
Gyro sensor : Built-in triaxial gyro sensor of Wii® Remote Plus Controller™
Terrestrial magnetism sensor : non
Generally, the values measured by wide-range positioning sensors include large errors. In order to reduce influence of the errors, WR-AOTS™ Ver. 2.04 conducts the following processes.
Removal of noise and bias from measured values of acceleration
This process is always conducted when the acceleration sensor is used. The measured values of acceleration sensor include noise (measurement error as rapid vibrations) and bias (measurement error as long-term constant value). These are removed by moving average processing, etc.
Anti-drift for measured value of GPS
This process is conducted only when the Anti-drift checkbox is checked. The positioning values of GPS include several m - dozens m error. The positioning value from GPS is received every 1 s. If the GPS sends the moving distance that is impossible to be moved with in 1 s in the human walking velocity (e.g. over 20 m), this is regarded as drift and is ignored. In this case, even if the receivable Satellites are 4 or over, GPS indicator shows unavailable (gray).
INS
This process is conducted only when the INS checkbox is checked. When the positioning value of GPS cannot be used (the receivable Satellites is less than 4, or in drift), only the measured value of the acceleration sensor is used to find the position. When the positioning value of GPS can be used, both the measured value of the acceleration sensor and the positioning value of GPS are used to find the position. During this process is conducted, the INS indicator shows available (red).
Stable operation mode
This process is conducted only when the Stable operation checkbox is checked. Both the positioning value of GPS and the measured value of acceleration sensor are ignored, and only the buttons on Wii® Remote Plus Controller™ and mouse navigation are available. Furthermore, in use of the measured values of gyro sensor, only the horizontal rotation (yaw) is available, and the vertical rotations (pitch and roll) are ignored.
National Institute of Advanced Industrial Science and Technology, Japan
