nkysdb: なかよし論文データベース
中谷 匡志 様の 共著関連データベース
+(A list of literatures under single or joint authorship with "中谷 匡志")
共著回数と共著者名 (a list of the joint author(s))
24: 中谷 匡志
11: 山本 浩之
7: 宇津木 慎司
6: 大沼 和弘
3: 井ノ口 拓郎, 児玉 淳一, 奈良 禎太, 後藤 龍彦, 金子 勝比古
1: 古川 浩司, 坊澤 慎太郎, 天童 涼太, 山岸 明弘, 崎井 優仁, 平方 宏朋, 新妻 弘明, 朱通 恭章, 村田 康一, 桐原 章浩, 水戸 義忠, 浜野 誠士, 渡邉 光, 渡邊 行朗, 澤田 純之, 瀧口 裕介, 田中 洋平, 田邉 一真, 籾山 雅彦, 苅山 直将, 西村 毅, 遠藤 修一, 鈴木 健, 鶴田 亮介
発行年とタイトル (Title and year of the issue(s))
2007: 凍結融解作用を受ける岩石のき裂進展量の計測
2008: 岩石内で進展するき裂の3次元可視化手法の検討
2010: X線CTによる凍結融解履歴を与えた岩石の観察
2013: 地下空洞周辺岩盤における地質状況を考慮したグラウチング品質管理支援システムの適用
Development of Grouting Management System and Its Application to Underground Tunnel
2013: 掘削発破を利用した坑内弾性波探査手法の開発
Develop a measuring system of seismic wave under digging a tunnel by excavation blasting
2015: 地下構造物周辺岩盤における地質状況を考慮した地山補強調査・設計・施工システムの開発
Development of an Exploration, Design, and Construction System for Bedrock Reinforcement Considering Geology at the Tunnel
2015: 掘削発破を起振源とする反射法弾性波探査の山岳トンネルへの適用事例
Case Study of Seismic Reflection Survey Using Excavation Blasting in Tunnel
2016: CIMを活用した斜面計測監視3D ICTシステムの開発および施工現場への適用
Development of a slope measuring 3D ICT system using construction information modeling/management concepts and the introduction to construction sites
2016: トンネル掘削発破で発生する弾性波卓越周波数による地質評価について
Evaluation of Geological Condition Using Frequency by Excavation Blasting in Tunnel
2016: トンネル掘削発破を起振源とするケーブルレス切羽前方探査法の開発と適用
Development And Application Of Cableless Prediction Ahead Of Tunnel Face Using Excavation Blasting In Tunnel
2017: CIMを活用した斜面計則監視3D ICTシステムの開発および施工現場への適用
Development and on site application of the slope monitoring 3D ICT system, using the construction information modeling/management concepts (CIM)
2017: スペクトログラムを用いた弾性波速度推定方法
Estimation of P wave velocity using Spectrogram
2017: トンネル坑内探査により得られた弾性波速度と切羽における地質状況との関係
Developement of an Estimation System for Tunnel Support Considering Geology
2018: トンネル施工現場における地質状況ICT管理システムの構築
Construction of a geological judgement system using ICT technologies at tunnel construction sites
2018: 切羽での掘削発破を起振源とするトンネル前方探査における切羽前方速度推定手法の簡略化
Simplification of velocity estimation method on a tunnel forward exploration using blasting at the tunnel face
2018: 掘削発破による三次元切羽前方探査の基礎的研究
Fundamental Study Of Three Dimensional Reflection Method By Excavation Blast As Exploration Ahead of Tunnel Face
2019: トンネル掘削時の発破音と弾性波による切羽安定予測手法について
Evaluation method for tunnel face stability by using sound and elastic wave occurred excavation blasting
2019: 反射法弾性波による切羽前方の定量評価と適用事例
Case Study on Estimating P wave Velocity Based on Seismic Reflection Method Ahead of the Tunnel Face
2020: GB SARを用いたトンネル切羽変位の計測
Measurement of Tunnel Face Displacement Using GB SAR
2020: 三次元切羽前方探査の開発と適用事例
Development and Application Example of Three Dimensional Exploration Ahead of Tunnel Face
2020: 造成現場におけるICレコーダーを利用した簡易弾性波探査の適用例
Case Study on Ground Classification based on Seismic Survey using IC Recorder
2021: GB SARを用いたトンネル切羽監視システムの現場実証実験
Experiment of Tunnel Face Measurement System with GB SAR
2021: 掘削発破を用いた三次元切羽前方探査の開発
Development of Three Dimensional Exploration Ahead of Tunnel Face Using Excavation Blasting
2022: 合成開口レーダを用いた変状検知システムの開発
Development of Displacement Measurement System Using Ground Based Synthetic Aperture Radar