Matsumoto's Homepage

産総研
国際会議
2024
  • "Trends and challenges of remanufacturing in the circular economy"
  • "Business design of product circulation using life cycle simulation"
    • Hideki Sato, Takuro Mori, Ippei Kono, Hitoshi Komoto, Mitsutaka Matsumoto and Yoshiyuki Furukawa
    • The 16th International Conference on EcoBalance (EcoBalance 2024), Sendai, November 2024.
  • "Metal powder based additive manufacturing technologies for realizing circular economy society"
  • "Unlocking consumer adoption: exploring factors influencing preferences for refurbished smartphones across Japan, Germany, and Thailand"
    • Mitsutaka Matsumoto, Ai Chinen, Kenichiro Chinen, Christian Clemm, Chanathip Pharino and Aksornchan Chaianong
    • Electronics Goes Green 2024+, Berlin, June 2024.
  • "Trends and challenges of remanufacturing in Japan"
2023
  • "Digitizing manufacturing processes of wooden products for sustainability"
    • Yukito Minoshima, Mitsutaka Matsumoto and Sharifu Ura
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "Improving remanufacturing processes by reverse engineering"
    • Shizuma Mitsuya, Mitsutaka Matsumoto, Naoko Sato, Harumichi Sato, and Sharifu Ura
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "Environmental impact of remanufacturing in mining machine"
    • Tomohisa Kanazawa, Mitsutaka Matsumoto, Mitsuhiro Yoshimoto, and Kiyotaka Tahara
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "The role of brick-and-mortar second-hand stores in the circular economy of EEE ― Preliminary findings in Japan and Germany"
    • Christian Clemm, Mitsutaka Matsumoto, Yoon-Young Chun, and Kenichiro Chinen
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "Eco-process design for metal additive manufacturing: Elucidation through case-studies"
    • Suryakumar Simhambhatla, Venkata Reddy, Mitsutaka Matsumoto, Carla Susana Assuad, Kristian Martinsen, and Sverre Guldbrandsen-Dahl
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "Disjoining of Aluminium and Steel weldings"
    • Kristian Martinsen, Sverre Gulbrandsen-Dahl, Mitsutaka Matsumoto, and Suryakumar Simhambhatla
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "Development of additive manufacturing repair processes and environmental effect evaluation"
    • Mitsutaka Matsumoto, Shizuma Mitsuya, Yukito Minoshima, Naoko Sato, Harumichi Sato, and Sharifu Ura
    • The 13th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2023), Nara, November 2023.
  • "Understanding of kinetic spraying of brittle materials towards low-temperature repair"
    • Kentaro Shinoda, Mohammed Shahien, Takashi Nagoshi, Kenji Nishimura, Masato Suzuki, and Mitsutaka Matsumoto
    • 12th Asian Thermal Spray Conference (ATSC 2023), Chennai, India, November 2023.
  • "Development of restoration technologies for remanufacturing"
    • Mitsutaka Matsumoto, Naoko Sato, Yuuki Kitanaka, Tomohiko Nakajima, Kentaro Shinoda, Media Romadona, and Naoki Seto
    • International Conference on Remanufacturing 2023 (ICoR2023), Amsterdam, June 2023.
  • "Mobile phone reuse businesses in Japan and an estimation of their environmental load reduction effects"
2022
  • "The remanufacturing research in AMRI, AIST"
  • "Environmental effect estimation of mobile phone reuse businesses"
    • Mitsutaka Matsumoto, Hamakazu Awazu, Junichi Tominaga and Keijiro Masui
    • The 15th International Conference on EcoBalance (EcoBalance 2022), Fukuoka, November 2022.
  • "Resource efficiency account with considering the quality of circulated material"
    • Kohmei Halada, Kiyotaka Tahara and Mitsutaka Matsumoto
    • The 15th International Conference on EcoBalance (EcoBalance 2022), Fukuoka, November 2022.
2021
  • "Improvement of processing-atmosphere on the powder bed AM-process using plasma treated AM-used powder"
  • "The role of remanufacturing to enhance resource efficiency of LIB product lifecycles"
  • "Opportunities and challenges of additive manufacturing for enabling circular manufacturing"
    • Mitsutaka Matsumoto, Naoko Sato, Harumichi Sato, Hirotomo Itagaki, Hisato Ogiso, Carla Susana Aqudelo Assuad and Kristian Martinsen
    • The 12th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2021), Online, December 2021.
  • "Communication of environmental data in the electronics refurbishment sector: Survey in Germany, Japan, and Indonesia"
    • Christian Clemm, Mitsutaka Matsumoto and Shu-San Gan
    • The 12th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2021), Online, December 2021.
  • "Workshop-based scenario quantification for sustainable consumption and production using a backcasting approach"
    • Sota Onozuka, Yusuke Kishita, Mitsutaka Matsumoto, Michikazu Kojima and Yasushi Umeda
    • The 12th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2021), Online, December 2021.
  • "The role of proenvironmental attitudes in circular purchasing behavior"
    • Yoon-Young Chun, Kenichiro Chinen and Mitsutaka Matsumoto
    • The 12th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2021), Online, December 2021.
  • "Perceptions of foreign brand electric vehicles made in the US"
    • Kenichiro Chinen and Mitsutaka Matsumoto
    • The 12th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2021), Online, December 2021.
  • "Library of facility models for structural and graphical definition of recycling system simulation considering information flows"
    • Hitoshi Komoto, Mitsutaka Matsumoto and Shinsuke Kondoh
    • The 28th CIRP Conference on Life Cycle Engineering (CIRP-LCE), Jaipur, India (Web conference), March 2021.
    • Procedia CIRP, Vol.98, pp.187-192, 2021.
  • "Quantitative assessment method for supporting scenario workshops toward sustainable consumption and production"
    • Sota Onozuka, Yusuke Kishita, Mitsutaka Matsumoto, Michikazu Kojima and Yasushi Umeda
    • The 28th CIRP Conference on Life Cycle Engineering (CIRP-LCE), Jaipur, India (Web conference), March 2021.
    • Procedia CIRP, Vol.98, pp.49-54, 2021.
  • "Asian's circular consumption behavior - Market reviews and consumer perception investigation for a refurbished smartphone in Japan, Singapore, and Indonesia"
    • Yoon-Young Chun, Mitsutaka Matsumoto, Kenichiro Chinen and Kiyotaka Tahara
    • The 14th International Conference on EcoBalance (EcoBalance 2020), Sendai (Web conference), March 2021.
  • "Scenario design approach to envisioning sustainable consumption and production in Asian context"
    • Yusuke Kishita, Sota Onozuka, Mitsutaka Matsumoto, Michikazu Kojima and Yasushi Umeda
    • 6th International Forum on Sustainable Future in Asia, Tsukuba (Web conference), January 2021.
2020
  • "Understanding Asian consumer acceptance toward a refurbished smartphone"
  • "Resource efficiency that reflects the quality of resource recycling such as horizontal recycling and cascade recycling"
    • Gaku Miyake, Genichiro Matsuda, Akio Tajima, Mitsutaka Matsumoto and Kiyotaka Tahara
    • Electronics Goes Green 2020+, Berlin (Web conference), September 2020.
  • "Product remanufacturing in Japan: Trends and challenges"
2019
  • "Barriers for the remanufacturing business in Southeast Asia: The role of governments in the circular economy"
    • Mitsutaka Matsumoto, Kenichiro Chinen, Khairur Rijal Jamaludin and Badli Shah Mohd Yusoff
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 1", pp.151-161, 2021.
  • "Additive manufacturing for circular manufacturing: Trends and challenges - A survey in Japan, Norway, and India"
    • Mitsutaka Matsumoto, Shingo Hirose, Kristian Martinsen, Suryakumar Simhambhatla, Venkata Reddy and Sverre Guldbrandsen-Dahl
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 1", pp.517-532, 2021.
  • "Closed loop tolerance engineering modelling and maturity assessment in a circular economy perspective"
    • Kristian Martinsen, Carla Susana Aqudelo Assuad, Tomomi Kito, Mitsutaka Matsumoto, Venkata Reddy Nallagundla and Sverre Guldbrandsen-Dahl
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 1", pp.297-308, 2021.
  • "Incremental sheet metal forming: A candidate process for circular manufacturing"
    • Venkata Reddy Nallagundla, Suryakumar Simhambhatla, Mitsutaka Matsumoto, Kristian Martinsen and Sverre Guldbrandsen-Dahl
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
  • "Development of a method for measuring resource efficiency for product lifecycle"
    • Gaku Miyake, Naoya Miyaji, Akio Tajima, Mitsutaka Matsumoto and Keijiro Masui
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
  • "Model-based design of product-related information management system for accelerating resource circulation"
    • Hitoshi Komoto, Mitsutaka Matsumoto and Shinsuke Kondoh
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 1", pp.353-364, 2021.
  • "Cyber physical system in inverse manufacturing"
    • Shinsuke Kondoh, Hitoshi Komoto and Mitsutaka Matsumoto
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 1", pp.489-500, 2021.
  • "Understanding of individuals' intention toward car sharing usage in the Southeast-Asia region: From university students in Thailand and Indonesia"
    • Yoon-Young Chun, Mitsutaka Matsumoto and Kiyotaka Tahara
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 2", pp.147-159, 2021.
  • "The Chinese-brand electric vehicles in the eyes of the US consumers"
    • Kenichiro Chinen, Hideki Endo, Mitsutaka Matsumoto and Yongliang Han
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
    • In: Kishita et al. (eds.) "EcoDesign and Sustainability 2", pp.3-16, 2021.
  • "An analysis of consumer purchase intentions for remanufactured auto parts"
    • Hideki Endo, Kenichiro Chinen and Mitsutaka Matsumoto
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
  • "Development of platinum group metals-based diffusion coatings for oxidation protection of Ni-based superalloys, and its application to remanufacturing process"
    • Dao Chi Tue, Masao Hayakawa, Akira Ishida, Le Thi Hong Lien, Mitsutaka Matsumoto and Hideyuki Murakami
    • The 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2019), Yokohama, November 2019.
2018
  • "Development of a method for measuring resource efficiency for product lifecycle"
    • Gaku Miyake, Naoya Miyaji, Akio Tajima, Keijiro Masui, Mitsutaka Matsumoto and Shinsuke Kondoh
    • Going Green CARE INNOVATION 2018, Vienna, November 2018.
  • "Requirements for product information flow to enhance WEEE urban mining"
    • Mitsutaka Matsumoto and Keijiro Masui
    • Going Green CARE INNOVATION 2018, Vienna, November 2018.
  • "Developing a model to simulate the markets of remanufactured products"
    • Mitsutaka Matsumoto, Nuwan Lasantha Senevirathne and Yasushi Umeda
    • The 13th International Conference on EcoBalance (EcoBalance 2018), Tokyo, October 2018.
  • "Technological challenges to promote remanufacturing"
    • Mitsutaka Matsumoto, Yasunari Matsuno, Kenichi Nakajima, Masao Hayakawa and Hideyuki Murakami
    • The 13th International Conference on EcoBalance (EcoBalance 2018), Tokyo, October 2018.
  • "How Do We Extract the Essence of Sustainable Consumption and Production? - A Case Study of Southeast Asia"
    • Yusuke Kishita, Shogo Kuroyama, Mitsutaka Matsumoto, Michikazu Kojima and Yasushi Umeda
    • The 13th International Conference on EcoBalance (EcoBalance 2018), Tokyo, October 2018.
  • "R&D challenges to promote product remanufacturing"
    • Mitsutaka Matsumoto, Yasunari Matsuno, Masao Hayakawa, Kenichi Nakajima, Hideyuki Murakami and Shingo Hirose
    • International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018), Sapporo, July 2018.
    • Received the Outstanding Presenter Award
  • "INMAN project − Intelligent Circular Manufacturing Research Collaboration among Norway, Japan, and India"
    • Mitsutaka Matsumoto
    • 6th Japan-Norway Joint Committee Meeting on Cooperation in Science and Technology, Ministry of Foreign Affiars, Tokyo, June 2018.
  • "Development of multi-value circulation based on remanufacturing"
    • Kenichi Nakajima, Mitsutaka Matsumoto, Hideyuki Murakami, Masao Hayakawa, Yasunari Matsuno and Wataru Takayanagi
    • 12th International Conference on Society & Materials (SAM12), Metz, France, May 2018.
  • "Designing future visions of sustainable consumption and production in Southeast Asia"
    • Yusuke Kishita, Shogo Kuroyama, Mitsutaka Matsumoto, Michikazu Kojima and Yasushi Umeda
    • The 25th CIRP Conference on Life Cycle Engineering (CIRP-LCE), Copenhagen, May 2018.
    • Procedia CIRP, Vol.69, pp.66-71, 2018.
  • "JST Mirai-Program: Realization of a sustainable society with innovation in manufacturing for resource circulation"
    • Shozo Takata, Mitsutaka Matsumoto and Shinsuke Kondoh
    • CIRP STC LCE/A meeting, CIRP Winter Meeting, Paris, February 2018.
2017
  • "A study on product refurbishment and remanufacturing in Asian region"
    • Mitsutaka Matsumoto, Yasushi Umeda, Michikazu Kojima, Keijiro Masui and Yusuke Kishita
    • The 10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2017), Tainan, Taiwan, December 2017.
  • "On the circularity of remanufactured products in Asia ― their market competitiveness"
    • Yasushi Umeda, Kazuma Ishizuka, Mitsutaka Matsumoto, Michikazu Kojima and Yusuke Kishita
    • The 10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2017), Tainan, Taiwan, December 2017.
  • "Creating visions of Asian sustainable consumption and production in 2050"
    • Yusuke Kishita, Shogo Kuroyama, Mitsutaka Matsumoto, Michikazu Kojima and Yasushi Umeda
    • The 10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2017), Tainan, Taiwan, December 2017.
  • "A study on specification of information system for product life cycle management in IoT era"
  • "Simulation-based analysis of impacts of dynamic data acquisition and integration on the realization of an efficienc recycling process chain for small electric and eletrcial equipment"
    • Hitoshi Komoto, Shinsuke Kondoh, Mitsutaka Matsumoto and Keijiro Masui
    • The 10th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2017), Tainan, Taiwan, November 2017.
  • "Sustainable production and remanufacturing in Japan and in Asia"
  • "Service models and remanufacturing"
  • "Modeling competitive market of remanufactured products"
    • Yasushi Umeda, Kazuma Ishizuka, Mitsutaka Matsumoto and Yusuke Kishita
    • The 67th CIRP General Assembly, Lugano, Switzerland, August 2017.
  • "Servitization as an enabler for product circulations"
  • "Trends and challenges in product remanufacturing in emerging ecomonies -- A case study in photocopiers in Asian region"
    • Mitsutaka Matsumoto, Koshi Kamigaki and Yasushi Umeda
    • 2017 Joint Conference of ISIE and ISSST (the 9th biennial conference of the International Society for Industrial Ecolocy (ISIE) and the 25th annual conference of the International Symposium on Sustainable Systems and Technology (ISSST)), Chicago, USA, June 2017.
  • "Remanufacturing and refurbishing in developed and developing countries in Asia - A case study in photocopiers"
2016
  • "Criticality assessment and R&D for circulation of critical materials"
  • "Sustainable production through product remanufacturing"
    • Mitsutaka Matsumoto
    • S16 Project 1st Workshop on Policy Design Research for SCP, Bangkok, October 2016.
  • "Trends and research challenges of remanufacturing in Japan"
    • Mitsutaka Matsumoto
    • (invited) 2016 International Remanufacturing Industry Conference, Seoul, September 2016.
  • "Development of a demand forecasting model for automotive electric component remanufacturing"
    • Mitsutaka Matsumoto, Yasushi Umeda, Shuto Tsuchiya and Li Tang
    • Electronics Goes Green 2016+, Berlin, September 2016.
  • "Pre-evaluation of Kaizen plan considering efficiency and employee satisfaction by simulation using data assimilation -Toward constructing Kaizen support framework-"
    • Tatsuro Myokan, Mitsutaka Matsumoto, Takashi Okuma, Ryosuke Ichikari, Karimu Kato, Daichi Ota and Takeshi Kurata
    • Proceedings of the 4th International Conference on Serviceology (ICServ2016), Tokyo, September 2016.
  • "Study on demand forecasting for production planning in automotive parts remanufacturing"
    • Mitsutaka Matsumoto and Yasushi Umeda
    • International Symposium on Green Manufacturing and Applications (ISGMA 2016), Bali, Indonesia, June 2016.
2015
  • "Examination of demand forecasting for remanufacturing without information of new product sales time distribution"
    • Mitsutaka Matsumoto and Yasushi Umeda
    • Proceedings of the 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2015), pp.649-653, Tokyo, December 2015.
  • "A comparative analysis of consumers' perception towards remanufactured auto parts in the US and in Japan, and the implications"
    • Hideki Endo, Mitsutaka Matsumoto and Kenichiro Chinen
    • Proceedings of the 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2015), pp.300-304, Tokyo, December 2015.
  • "Study on the diffusion of NGVs in Japan and other nations using the Bass model"
    • Yue Zhu, Koji Tokimatsu and Mitsutaka Matsumoto
    • Proceedings of the 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2015), pp.638-644, Tokyo, December 2015.
  • "An overview of reman businesses in Japan and challenges for reman"
    • Mitsutaka Matsumoto
    • (invited) 2nd Asia Pacific Reman Summit, Singapore, November 2015.
  • "Requirements of service business models and of incorporating remanufacturing in them: Case study in Japan"
  • "Business practices and challenges in remanufacturing in Japan"
  • "A feasibility study of remote inverse manufacturing"
    • Nozomu Mishima, Jun Ooki, Yuta Kadowaki, Kenta Torihara, Kiyoshi Hirose and Mitsutaka Matsumoto
    • Proceedings of the 22nd ISPE International Conference on Concurrent Engineering, Delft, July 2015.
  • "Product remanufacturing as an enabler for sustainable manufacturing"
    • Mitsutaka Matsumoto
    • (invited) International Symposium on Green Manufacturing and Applications (ISGMA 2015), Qingdao, China, June 2015.
  • "A comparative analysis of consumers' perception towards remanufactured auto parts in the US and in Japan"
    • Mitsutaka Matsumoto, Kenichiro Chinen, Hideki Endo
    • International Conference on Remanufacturing 2015 (ICoR2015), Amsterdam, June 2015.
  • "A diffusion model for natural gas vehicles: a case study in Japan"
    • Yue Zhu, Koji Tokimatsu, Mitsutaka Matsumoto
    • Energy Procedia, Vol.75, pp.2987-2993, (The 7th International Conference on Applied Energy (ICAE2015), March, 2015.
2014
  • "A diffusion model for natural gas vehicles: a case study of Japan"
    • Hector Shuku, Koji Tokimatsu, Mitsutaka Matsumoto
    • The 2014 China-Japan-Korea Joint Symposium on Waste Management Technologies and Energy Conversion, Dalian, October 2014.
  • "A study on the effectivenss of service and leasing models for remanufacturing"
    • Mitsutaka Matsumoto
    • The 3rd Annual World Reman Summit, Rochester, September 2014.
  • "A proposal on a remote recycling system for small-sized e-waste"
    • Nozomu Mishima, Kenta Torihara, Kiyoshi Hirose, Mitsutaka Matsumoto
    • Proceedings of 2014 International Conference on Concurrent Engineering, pp.46-53, Beijin, September 2014.
  • "The current situation and challenges in big-data use in services - a case study in an urban development"
    • Mitsuru Kawamoto, Mitsutaka Matsumoto, Takeshi Kurata
    • Proceedings of the 2nd International Conference on Serviceology (ICServ 2014), Yokohama, September 2014.
  • "Potential and obstacles for auto-parts reuse and remanufacturing in Japan"
    • Mitsutaka Matsumoto
    • 2014 International Symposium on Sustainable Systems & Technologies (ISSST 2014), Oakland, May 2014.
2013
  • "Promoting and Inhibiting Factors for Industrial Product Services"
    • Mitsutaka Matsumoto
    • Proceedings of the 8th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2013), Jeju island, Korea, December 2013.
2012
  • "Development and Changes in the Industrial Product Service Systems -- A Case Study of the Photocopier PSS"
    • Mitsutaka Matsumoto and Koshi Kamigaki
    • Proceedings of the 4th CIRP Conference on Industrial Product Service Systems (CIRP-IPS2), Tokyo, pp.167-172, November 2012.
  • "Essay Regarding the B2B Type Manufacturer's Service Productivity Improvement Building upon Interactions between Service Employees, Customers and Products"
    • Koshi Kamigaki and Mitsutaka Matsumoto
    • Proceedings of the 4th CIRP Conference on Industrial Product Service Systems (CIRP-IPS2), Tokyo, pp.215-220, November 2012.
  • "Challenges in Promoting 3R of Plastics of EOL Electronics Products"
    • Mitsutaka Matsumoto, Tohru Kamo and Keijiro Masui
    • Proceedings of Electronics Goees Green 2012+, Berlin, September 2012.
  • "An analysis model for future demands of industrial products ― case of automobile"
    • Mitsutaka Matsumoto and Shinichiro Morimoto
    • 2012 International Symposium on Reliability Engineering and Risk Management, Yokohama, August 2012.
2011
  • "Product remanufacturing industries in Japan"
    • Mitsutaka Matsumoto
    • (invited) 2011 APO (Asia Productivity Organization) Workshop on Green Supply Chains and Eco-design, Tokyo, December 2011.
  • "Space technology transfer: spin-off cases from Japan"
    • Karen Venturini, Chiara Verbano and Mitsutaka Matsumoto
    • 4th International Conference of Education, Research and Innovation (ICERI 2011), Madrid, November 2011.
  • "Product end-of-life (EOL) strategies to promote material resource circulations ― From case studies of product reuse and remanufacturing businesses in Japan"
    • Mitsutaka Matsumoto
    • International Symposium on Green Manufacturing and Applications (ISGMA 2011), Seoul, October 2011.
  • "Business strategies in product remanufacturing services ― case studies in remanufacturing in Japan"
    • Mitsutaka Matsumoto
    • International Conference on Remanufacturing, Glasgow, UK, July 2011.
  • "Business innovations for sustainable society ― Case study on product reuse industries in Japan ―"
    • Mitsutaka Matsumoto
    • (invited) International Symposium of MOT MBA in Chonnam National University on Green Technology & Business Opportunity for SMEs, Gwangju, Korea, January 2011.
2010
  • "Consumer preferences for reuse products: a case study on auto-parts reuse in Japan"
  • "Requirements and obstacles of eco-design product businesses ― implications from case studies of product reuse businesses in Japan"
    • Mitsutaka Matsumoto
    • (invited) 2010 APO (Asia Productivity Organization) Workshop on Eco-design, Taipei, November 2010.
  • "Development of a model to analyze the effect of business-academia collaboration-driven R&D at public research institutes"
    • Mitsutaka Matsumoto, Shinji Yokota and Junji Itoh
    • Proceedings of the R&D Management Conference 2010, Manchester, June 2010.
2009
  • "Medeling the social acceptance of product remanufacturing"
    • Mitsutaka Matsumoto
    • Proceedings of the 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2009), Sapporo, December 2009.
  • "Wireless sensor nodes for monitoring the power consumption of information and communication devices"
    • Toshihiro Itoh, Yi Zhang, Mitsutaka Matsumoto and Ryutaro Maeda
    • Proceedings of the 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2009), Sapporo, December 2009.
  • "A study on an analysis of consumers' acceptance against modular design: proposal of laptop PC"
    • Kuniko Mishima, Nozomu Mishima, Shinsuke Kondoh and Mitsutaka Matsumoto
    • Proceedings of the 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2009), Sapporo, December 2009.
  • "A multi-agent model for product reuse service markets"
    • Mitsutaka Matsumoto, Takeshi Takenaka and Shinsuke Kondoh
    • Proceedings of the International Conference on Soft Computing and Pattern Recognition (SoCPaR 2009), Malacca, Malaysia, December 2009.
  • "Wireless sensor network for power consumption reduction in information and communication systems"
    • Toshihiro Itoh, Yi Zhang, Mitsutaka Matsumoto and Ryutaro Maeda
    • Proceedings of IEEE Sensors 2009, pp.572-75, October 2009.
  • "Electronics and the Environment: ICT’s impacts on CO2 emissions"
  • "Modeling the process of public research institutes' output generating the economic impats"
    • Mitsutaka Matsumoto, Shinji Yokota, Junji Itoh and Naoki Ichikawa
    • Proceedings of the R&D Management Conference 2009, Vienna, June 2009.
  • "A study on remanufacturing businesses in Japan"
    • Mitsutaka Matsumoto and Koh Naito
    • 2009 IEEE International Symposium on Sustainable Systems and Technology, Tempe, May 2009.
2008
  • "Research topics on environmentally conscious design and manufacturing in AMRI, AIST"
    • Mitsutaka Matsumoto
    • (invited) The 1st Pan-Pacific MIRAI Forum, Seoul, November 2008.
  • "A Framework to Assess the Economic Impacts of ICT R&D in Public Research Institutes"
    • Mitsutaka Matsumoto
    • (invited) IITA International Symposium on ICT R&D 2008, Seoul, October 2008.
  • "The long term effects of ICT on international division of labor and CO2 emissions"
    • Mitsutaka Matsumoto and Yukari Takahashi
    • Proceedings of Electronics Goees Green 2008+, pp.353-358, Berlin, September 2008.
  • "Cost-profit analysis of multilateral recycling system in Asia"
    • Shinsuke Kondoh, Jun Fujimoto, Yasushi Umeda, Nozomu Mishima and Mitsutaka Matsumoto
    • Proceedings of Electronics Goes Green 2008+, pp.833-838, Berlin, September 2008.
  • "Development of a calculation method estimating science-based innovation impact"
    • Mitsutaka Matsumoto, Shinji Yokota, Koh Naito and Junji Itoh
    • Proceedings of the R&D Management Conference 2008, June 2008.
  • "Assessing the impacts of public R&D in National Institute of Advanced Industrial Science and Technology (AIST)"
  • "Proposal and feasibility assessment of tele-inverse manufacturing"
    • Mitsutaka Matsumoto, Nozomu Mishima, Keijiro Masui and Shinsuke Kondoh
    • Proceedings of the 2008 IEEE International Symposium on Electronics and the Environment, May 2008.
2007
  • "A Diffusion Model of Environmentally Conscious Products"
    • Mitsutaka Matsumoto, Shinsuke Kondoh, Jun Fujimoto, Yasushi Umeda and Keijiro Masui
    • Proceedings of the 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2007), December 2007.
  • "Total performance design of product life cycle considering the uncertainties in product-use stage"
    • Shinsuke Kondoh, Keijiro Masui, Nozomu Mishima and Mitsutaka Matsumoto
    • Proceedings of the 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2007), December 2007.
  • "Proposal of Total Performance Analysis on Manufacturing Processes"
    • Shinsuke Kondoh, Nozomu Mishima, Keijiro Masui, Tsuneo Kurita and Mistutaka Matsumoto
    • Proceedings of the 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2007), December 2007.
  • "Multi agent algorithm for matching demand and supply of recovered components considering the fluctuations in user preference and conditions of components"
    • Shinsuke Kondoh, Toshitake Tateno and Mitsutaka Matsumoto
    • Proceedings of the 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2007), December 2007.
  • "Discussion on Factor X indicator for Eco-Products Comparison"
    • Jahau Lewis Chen, Shinsuke Kondoh, Keijiro Masui, Nozomu Mishima and Mitsutaka Matsumoto
    • Proceedings of the 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2007), December 2007.
  • "Research management to jump the "valley of death""
    • Mitsutaka Matsumoto
    • (invited) IITA International Symposium on ICT R&D 2007, Seoul, October 2007.
  • "A multi-agent model approach to international climate change politics"
    • Hyun-Young Lee, Mitsutaka Matsumoto and Norichika Kanie
    • The 51th Annual Meeting of the International Society for the Systems Sciences, Article No.:2007-729, August 2007.
  • "A study on the potential of ICT on realizing environmentally sustainable society"
    • Mitsutaka Matsumoto and Jun Fujimoto
    • The 4th Asialics International Conference, July 2007.
  • "Innovation Generated by Technical Development and its Social Acceptance: A Case Study of Japanese Convenience Stores"
    • Ayako Mizumukai and Mitsutaka Matsumoto
    • The 4th Asialics International Conference, July 2007.
  • "Total performance analysis of product life cycle considering the uncertainties in product-use stage"
    • Shinsuke Kondoh, Keijiro Masui, Nozomu Mishima and Mitsutaka Matsumoto
    • Proceedings of the 14th CIRP Conference on Life Cycle Engineering (CIRP-LCE), pp.371-376, June 2007.
  • "A multi-agent model approach to public goods provision problems"
    • Mitsutaka Matsumoto, Hyun-Young Lee and Norichika Kanie
    • Amsterdam Conference on the Human Dimensions of Global Environmental Change, May 2007.
  • "A modelling framework of diffusions of green technologies"
    • Mitsutaka Matsumoto, Shinsuke Kondoh, Jun Fujimoto and Keijiro Masui
    • Proceedings of the 16th International Conference on Management of Technology (IAMOT 2007), pp.249-259, May 2007.
  • "Innovation Generated by Technical Development and its Social Acceptance: A Case Study of Japanese Convenience Stores"
    • Ayako Mizumukai and Mitsutaka Matsumoto
    • Proceedings of the 16th International Conference on Management of Technology (IAMOT 2007), pp.2838-2855, May 2007.
2006
  • "Modelling framework of innovation diffusions based on multi-agent models"
    • Mitsutaka Matsumoto, Shinsuke Kondoh, Keijiro Masui, Jun Fujimoto, Harunori Tsuchiya and Yasushi Umeda
    • Proceedings of Going Green CARE INNOVATION 2006, Vienna, November 2006.
  • "Low-carbon society scenario toward 2050"
    • Jun Fujimoto, Dean Poland and Mitsutaka Matsumoto
    • Proceedings of Going Green CARE INNOVATION 2006, Vienna, November 2006.
  • "Total performance analysis of product life cycle considering the deterioration and obsolescence of product value"
    • Shinsuke Kondoh, Keijiro Masui, Mitsuro Hattori, Nozomu Mishima and Mitsutaka Matsumoto
    • Proceedings of Going Green CARE INNOVATION 2006, Vienna, November 2006.
2005
  • "Prospects for an environmentally sustainable ICT society"
    • Mitsutaka Matsumoto, Tetsuya Tamura and Jun Fujimoto
    • Proceedings of the 4rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2005), December 2005.
  • "Impacts of ubiquitous society on the global warming problem in 2010"
    • Mitsutaka Matsumoto, Junko Hamano, Tetsuya Tamura and Hiroto Iguchi
    • Proceedings of the 2005 IEEE International Symposium on Electronics and the Environment, pp.183-188, May 2005.
2004
  • "Design for a Sustainable Society utilizing Information & Communication Technologies"
    • Jun Fujimoto and Mitsutaka Matsumoto
    • Proceedings of Electronics Goes Green 2004+, pp.577-584, September 2004.
  • "A macroeconomic analysis of the relationship between IT industries and environmental policies"
    • Mitsutaka Matsumoto, Jun Fujimoto, Masafumi Tekawa and Tetsuya Tamura
    • Proceedings of the 2004 IEEE International Symposium on Electronics and the Environment, pp.17-22, May 2004.
2003
  • "Eco Design of IT Society --- An analysis of the environmental effects of IT diffusion by using a CGE model"
    • Mitsutaka Matsumoto, Yasuko Irie and Jun Fujimoto
    • Proceedings of the 3rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2003), December 2003.
  • "An Evolutionary Game Approach to Sanctioning Problems"
    • Mitsutaka Matsumoto and Satoshi Fuchimoto
    • Proceedings of the 3rd International Conference on Nonlinear Analysis and Convex Analysis, pp.289-303, August 2003.
  • "Thesaurus-based Efficient Example Retrieval by Generating Retrieval Queries from Similarities"
    • Takehito Utsuro, Kiyotaka Uchimoto, Mitsutaka Matsumoto and Makoto Nagao
    • Proceedings of the 15th International Conference on Computational Linguistics, pp.1044-1048, August 1994.