|
|
List of publications |
| 2008 |
| Seungchol Choi,Mikio Horie and Yasuhisa Ando,Surface Forces related to the Accumulation and Dispersion of Dust due to the Locomotion of a Cantilever,Journal of Advanced Mechanical Design, Systems, and Manufacturing , 2 (2) (2008) 252-264. |
| Miyake Koji,Miki Nakano,Atsushi Korenaga,Yukari Hori,Taichi Ikeda,Masumi Asakawa,Toshimi Shimizu,Shinya Sasaki and Yasuhisa Ando.Nanoscale to Macroscale Investigation of the Frictional Properties of Physisorbed Layers of Self-Organized Phthalocyanine Derivatives,TRIBOLOGY LETTERS, 31(1) (2008) 9-15. |
| Nakano Miki,Takao Ishida, Sano Hikaru,Sugimura Hiroyuki,Koji Miyake,Yasuhisa Ando and Shinya Sasaki,Tribological Properties of Self-assembled Monolayers Covalently Bonded to Si,APPLIED SURFACE SCIENCE ,255 (5) (2008) 3040-3045. |
| Y.Ando,Effect of Contact Geometry on Pull-off Force Evaluated under High-Vacuum and Humid Atmospheric Conditions,LANGMUIR,24(4) (2008) 1418-1424. |
| Kwang-Seop KIM,Y.Ando and Kyung-Woong KIM,The effect of temperature on the nanoscale adhesion and friction behaviors of thermoplastic polymer films,NANOTECHNOLOGY,19 (2008) 105701-105708. |
2007 |
| Y.Ando and N.Shiraishi, Development of a microlateral force sensor and its evaluation using lateral force microscopy,Virtual Journal of Nanoscale Science & Technology, 15(13) (2007) . |
| Y.Ando,T.Ikehara and S.Matsumoto, Development of Three-dimensional Microstages Using Inclined Deep Reactive Ion Etching, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 16 (3) (2007) 613- 621. |
| Y.Ando,Y.Inoue,K.kakuta,T.Igari and S.Mori, Tribological Properties of Asperity Arrays Coated with Self-Assembled Monolayersl, TRIBOLOGY LETTERS , 27 (13) (2007) 13-20. |
| Y.Ando,H.Takahashi and K.Hiratsuka, Friction force measurement in the absence of water capillary, Proc. JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology ( ICMDT 2007). |
| Kwang-Seop KIM,Y.Ando and Kyung-Woong KIM, Effect of Temperature on Tribological Characteristics of Thin Polymer Film Using Atomic Force Microscope,Proc. JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology ( ICMDT 2007), |
| Choi Seungchol,M.Horie and Y.Ando, Changes of Attachment of Dust between Asperity Array and Non-Asperity Array on Micro Contact Surface due to the Behaviors of Cantilever, Proc. JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology ( ICMDT 2007). |
| M.Matuura,K.Miyake,Y.Ando,M.Komatsu,S.Kase,M.Yamaguchi and S.Sasaki, Analysis of the Thermal Properties of a Liquid 1-Butanol Polymer Composed during a Plasma-Induced Reaction, OURNAL OF PHYSICAL CHEMISTRY B, 111(31) (2007) 9200-9208. |
| Seungchol Choi,M.Horie and Y.Ando,Cleaning of Dust between Interactive Contact Surfaces by Application of Normal Loads of Artificial Stainless-Cantilever in AFM,Journal of Advanced Mechanical Design, Systems, and Manufacturing, 1 (5) (2007) 743-754. |
| M.Nakano,Atsuko Korenaga,Atsushi Korenaga,K.Miyake,T.Murakamai,Y.Ando,H.Usami and S.Sasaki,Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions,TRIBOLOGY LETTERS,28(2) (2007) 131-137. |
| Y.Ando, T.Igari and S.Mori, Tribological Properties of LB films Measured under Zero Applied Load, Tribology Online, 2(11) (2007) 23-28. |
2006 |
| H.Matuura, T.Tanikawa, Y.Ando, K.Miyake and S.Sasaki, Formation of a stable, three-dimensional porous structure with self-assembled glass spheres using the plasma-induced electromeniscus phenomenon, APPLIED PHYSICS LETTERS, 88(20) (2006) 204105-204107 |
| Y.Ando and N.Shiraishi, Development of a microlateral force sensor and its evaluation using lateral force microscopy, REVIEW OF SCIENTIFIC INSTRUMENTS, 78(2006) 33701-33708 |
2005 |
| M. Nakano, T. Ishida, T. Numata, Y. Ando and S. Sasaki, Tribological Behavior of Self-Assembled Double Layer Measured by a Pin-on-plate Method, APPLIED SURFACE SCIENCE 242(3-4) (2005) 287-294. |
| Y. Ando, Effect of Capillary Formation on Friction and Pull-off Forces Measured on Submicron-size Asperities, TRIBOLOGY LETTERS19(1) (2005) 29-36. |
| S. Choi, Y. Ando, H. Fujie and M. Horie, Analysis of Pull-off Forces between Surfaces having Periodic Nanoscale Asperity Arrays, Proc. The 1st International Conference on Manufacturing, Machine Design and Tribology (2005). |
| Y. Ando, Development of Three-dimensional Microstages for Micro Tribology Testing, Proc. The 1st International Conference on Manufacturing, Machine Design and Tribology (2005). |
| Y. Ando, FABRICATION AND TESTING OF THREE-DIMENSIONAL STAGES PROVIDING DISPLACEMENT OF UP TO 8 um, Proc. International Conference on Solid State Sensors, Actuators and Microsystems (transducers '05) 1 (2005) 741-744. |
2004 |
| M. Nakano, T. Ishida, T. Numata, Y. Ando, S. Sasaki, Tribological Behavior of Terphenyl Self-Assembled Monolayer Studied by a Pin-on-Plate Method and Friction Force Microscopy, JAPANESE JOURNAL OF APPLIED PHYSICS 43(7B) (2004) 4619-4623. |
| Y. Ando, Friction and Pull-off Forces on Submicron-Size Asperities Measured in High-Vacuum and in both Dry and Humid Nitrogen at Atmospheric Pressure, JAPANESE JOURNAL OF APPLIED PHYSICS 43(7B) (2004) 4506-4510. |
| Y. Ando, Development of Three-dimensional Electrostatic Stages for Scanning Probe Microscope, SENSORS AND ACTUATORS A-PHYSICAL 114 (2004) 285-291. |
2003 |
| Y. Ando, Development of Three-Dimensional Electrostatic Stages for Scanning Probe Microscope, Proceedings of The 12th International Conference on Solid-State Sensors, Actuators and Microsystems 2 (2003) 1526-1529. |
| Y. Ando, Lowering friction coefficient under low loads by minimizing effects of adhesion force and viscous resistance, Wear 254 (2003) 965-973. |
| Y. Ando, Relation between Friction and Plastic Deformation Examined by Using Periodic Asperity Arrays Fabricated on an AFM Multipurpose Cantilever, Tribology Letters 15(2) (2003) 115-125. |
| Y. Ando, Tribology Tests Using FIB Processed Cantilevers, Proceedings of AIST-BAM Symposium on Materials Surfaces Technology in Twin Institute Programe (2003) 33-36. |